1. Welcome to Verizon Forums - the unofficial Verizon community! Have a question about Verizon? Click HERE to get started.
    Dismiss Notice
  2. Expecting Cell Phone Forums? We recently moved Verizon specific content to VerizonForums.com. If you previously had an account on CPF, it has been transferred!
    Dismiss Notice

Hanging up VX4500 in Driving Mode

Discussion in 'alt.cellular.verizon' started by C C, Jul 4, 2004.

  1. speedlever

    speedlever Guest

    "C C" <someone@microsoft.com> wrote in
    news:OGUFc.32570$eH1.15439962@newssvr28.news.prodigy.com:

    > Hello. I have VX4500 and this phone can be set to "Driving mode",
    > Anyway, when you are
    > finished with your call, you have to flip open the folder and (with
    > the phone holstered in your belt) you have to press the End key.
    >
    > The manual on pages 22 and 23 says that to end a call (both incoming
    > and outgoing) you may press the End key or the side key TWICE. The
    > side key (twice) doesn't work.



    I just recently moved to the VX4500/V02 f/w and find that my phone
    disconnects when the other party hangs up. I am in-between headsets
    right now, but think that worked the same way with the headset too.

    Perhaps you can get this functionality by updating your firmware. ??

    I just tried on my phone and it disconnected regardless whether I was
    the caller or the callee. (with auto answer set off, driving mode on).

    Set auto-answer to 1 or 3 rings and you don't even need the headset to
    use the speaker phone with the flip closed. Again, my 4500 disconnects
    when the calling party hangs up.
     



    › See More: Hanging up VX4500 in Driving Mode
  2. speedlever

    speedlever Guest

    "C C" <someone@microsoft.com> wrote in
    news:OGUFc.32570$eH1.15439962@newssvr28.news.prodigy.com:

    > Hello. I have VX4500 and this phone can be set to "Driving mode",
    > Anyway, when you are
    > finished with your call, you have to flip open the folder and (with
    > the phone holstered in your belt) you have to press the End key.
    >
    > The manual on pages 22 and 23 says that to end a call (both incoming
    > and outgoing) you may press the End key or the side key TWICE. The
    > side key (twice) doesn't work.



    I just recently moved to the VX4500/V02 f/w and find that my phone
    disconnects when the other party hangs up. I am in-between headsets
    right now, but think that worked the same way with the headset too.

    Perhaps you can get this functionality by updating your firmware. ??

    I just tried on my phone and it disconnected regardless whether I was
    the caller or the callee. (with auto answer set off, driving mode on).

    Set auto-answer to 1 or 3 rings and you don't even need the headset to
    use the speaker phone with the flip closed. Again, my 4500 disconnects
    when the calling party hangs up.
     
  3. speedlever

    speedlever Guest

    "C C" <someone@microsoft.com> wrote in
    news:OGUFc.32570$eH1.15439962@newssvr28.news.prodigy.com:

    > Hello. I have VX4500 and this phone can be set to "Driving mode",
    > Anyway, when you are
    > finished with your call, you have to flip open the folder and (with
    > the phone holstered in your belt) you have to press the End key.
    >
    > The manual on pages 22 and 23 says that to end a call (both incoming
    > and outgoing) you may press the End key or the side key TWICE. The
    > side key (twice) doesn't work.



    I just recently moved to the VX4500/V02 f/w and find that my phone
    disconnects when the other party hangs up. I am in-between headsets
    right now, but think that worked the same way with the headset too.

    Perhaps you can get this functionality by updating your firmware. ??

    I just tried on my phone and it disconnected regardless whether I was
    the caller or the callee. (with auto answer set off, driving mode on).

    Set auto-answer to 1 or 3 rings and you don't even need the headset to
    use the speaker phone with the flip closed. Again, my 4500 disconnects
    when the calling party hangs up.
     
  4. speedlever

    speedlever Guest

    "C C" <someone@microsoft.com> wrote in
    news:OGUFc.32570$eH1.15439962@newssvr28.news.prodigy.com:

    > Hello. I have VX4500 and this phone can be set to "Driving mode",
    > Anyway, when you are
    > finished with your call, you have to flip open the folder and (with
    > the phone holstered in your belt) you have to press the End key.
    >
    > The manual on pages 22 and 23 says that to end a call (both incoming
    > and outgoing) you may press the End key or the side key TWICE. The
    > side key (twice) doesn't work.



    I just recently moved to the VX4500/V02 f/w and find that my phone
    disconnects when the other party hangs up. I am in-between headsets
    right now, but think that worked the same way with the headset too.

    Perhaps you can get this functionality by updating your firmware. ??

    I just tried on my phone and it disconnected regardless whether I was
    the caller or the callee. (with auto answer set off, driving mode on).

    Set auto-answer to 1 or 3 rings and you don't even need the headset to
    use the speaker phone with the flip closed. Again, my 4500 disconnects
    when the calling party hangs up.
     
  5. speedlever

    speedlever Guest

    "C C" <someone@microsoft.com> wrote in
    news:OGUFc.32570$eH1.15439962@newssvr28.news.prodigy.com:

    > Hello. I have VX4500 and this phone can be set to "Driving mode",
    > Anyway, when you are
    > finished with your call, you have to flip open the folder and (with
    > the phone holstered in your belt) you have to press the End key.
    >
    > The manual on pages 22 and 23 says that to end a call (both incoming
    > and outgoing) you may press the End key or the side key TWICE. The
    > side key (twice) doesn't work.



    I just recently moved to the VX4500/V02 f/w and find that my phone
    disconnects when the other party hangs up. I am in-between headsets
    right now, but think that worked the same way with the headset too.

    Perhaps you can get this functionality by updating your firmware. ??

    I just tried on my phone and it disconnected regardless whether I was
    the caller or the callee. (with auto answer set off, driving mode on).

    Set auto-answer to 1 or 3 rings and you don't even need the headset to
    use the speaker phone with the flip closed. Again, my 4500 disconnects
    when the calling party hangs up.
     
  6. speedlever

    speedlever Guest

    "C C" <someone@microsoft.com> wrote in
    news:OGUFc.32570$eH1.15439962@newssvr28.news.prodigy.com:

    > Hello. I have VX4500 and this phone can be set to "Driving mode",
    > Anyway, when you are
    > finished with your call, you have to flip open the folder and (with
    > the phone holstered in your belt) you have to press the End key.
    >
    > The manual on pages 22 and 23 says that to end a call (both incoming
    > and outgoing) you may press the End key or the side key TWICE. The
    > side key (twice) doesn't work.



    I just recently moved to the VX4500/V02 f/w and find that my phone
    disconnects when the other party hangs up. I am in-between headsets
    right now, but think that worked the same way with the headset too.

    Perhaps you can get this functionality by updating your firmware. ??

    I just tried on my phone and it disconnected regardless whether I was
    the caller or the callee. (with auto answer set off, driving mode on).

    Set auto-answer to 1 or 3 rings and you don't even need the headset to
    use the speaker phone with the flip closed. Again, my 4500 disconnects
    when the calling party hangs up.
     
  7. speedlever

    speedlever Guest

    "C C" <someone@microsoft.com> wrote in
    news:OGUFc.32570$eH1.15439962@newssvr28.news.prodigy.com:

    > Hello. I have VX4500 and this phone can be set to "Driving mode",
    > Anyway, when you are
    > finished with your call, you have to flip open the folder and (with
    > the phone holstered in your belt) you have to press the End key.
    >
    > The manual on pages 22 and 23 says that to end a call (both incoming
    > and outgoing) you may press the End key or the side key TWICE. The
    > side key (twice) doesn't work.



    I just recently moved to the VX4500/V02 f/w and find that my phone
    disconnects when the other party hangs up. I am in-between headsets
    right now, but think that worked the same way with the headset too.

    Perhaps you can get this functionality by updating your firmware. ??

    I just tried on my phone and it disconnected regardless whether I was
    the caller or the callee. (with auto answer set off, driving mode on).

    Set auto-answer to 1 or 3 rings and you don't even need the headset to
    use the speaker phone with the flip closed. Again, my 4500 disconnects
    when the calling party hangs up.
     
  8. speedlever

    speedlever Guest

    "C C" <someone@microsoft.com> wrote in
    news:OGUFc.32570$eH1.15439962@newssvr28.news.prodigy.com:

    > Hello. I have VX4500 and this phone can be set to "Driving mode",
    > Anyway, when you are
    > finished with your call, you have to flip open the folder and (with
    > the phone holstered in your belt) you have to press the End key.
    >
    > The manual on pages 22 and 23 says that to end a call (both incoming
    > and outgoing) you may press the End key or the side key TWICE. The
    > side key (twice) doesn't work.



    I just recently moved to the VX4500/V02 f/w and find that my phone
    disconnects when the other party hangs up. I am in-between headsets
    right now, but think that worked the same way with the headset too.

    Perhaps you can get this functionality by updating your firmware. ??

    I just tried on my phone and it disconnected regardless whether I was
    the caller or the callee. (with auto answer set off, driving mode on).

    Set auto-answer to 1 or 3 rings and you don't even need the headset to
    use the speaker phone with the flip closed. Again, my 4500 disconnects
    when the calling party hangs up.
     
  9. speedlever

    speedlever Guest

    "C C" <someone@microsoft.com> wrote in
    news:OGUFc.32570$eH1.15439962@newssvr28.news.prodigy.com:

    > Hello. I have VX4500 and this phone can be set to "Driving mode",
    > Anyway, when you are
    > finished with your call, you have to flip open the folder and (with
    > the phone holstered in your belt) you have to press the End key.
    >
    > The manual on pages 22 and 23 says that to end a call (both incoming
    > and outgoing) you may press the End key or the side key TWICE. The
    > side key (twice) doesn't work.



    I just recently moved to the VX4500/V02 f/w and find that my phone
    disconnects when the other party hangs up. I am in-between headsets
    right now, but think that worked the same way with the headset too.

    Perhaps you can get this functionality by updating your firmware. ??

    I just tried on my phone and it disconnected regardless whether I was
    the caller or the callee. (with auto answer set off, driving mode on).

    Set auto-answer to 1 or 3 rings and you don't even need the headset to
    use the speaker phone with the flip closed. Again, my 4500 disconnects
    when the calling party hangs up.
     
  10. speedlever

    speedlever Guest

    "C C" <someone@microsoft.com> wrote in
    news:OGUFc.32570$eH1.15439962@newssvr28.news.prodigy.com:

    > Hello. I have VX4500 and this phone can be set to "Driving mode",
    > Anyway, when you are
    > finished with your call, you have to flip open the folder and (with
    > the phone holstered in your belt) you have to press the End key.
    >
    > The manual on pages 22 and 23 says that to end a call (both incoming
    > and outgoing) you may press the End key or the side key TWICE. The
    > side key (twice) doesn't work.



    I just recently moved to the VX4500/V02 f/w and find that my phone
    disconnects when the other party hangs up. I am in-between headsets
    right now, but think that worked the same way with the headset too.

    Perhaps you can get this functionality by updating your firmware. ??

    I just tried on my phone and it disconnected regardless whether I was
    the caller or the callee. (with auto answer set off, driving mode on).

    Set auto-answer to 1 or 3 rings and you don't even need the headset to
    use the speaker phone with the flip closed. Again, my 4500 disconnects
    when the calling party hangs up.
     
  11. speedlever

    speedlever Guest

    "C C" <someone@microsoft.com> wrote in
    news:OGUFc.32570$eH1.15439962@newssvr28.news.prodigy.com:

    > Hello. I have VX4500 and this phone can be set to "Driving mode",
    > Anyway, when you are
    > finished with your call, you have to flip open the folder and (with
    > the phone holstered in your belt) you have to press the End key.
    >
    > The manual on pages 22 and 23 says that to end a call (both incoming
    > and outgoing) you may press the End key or the side key TWICE. The
    > side key (twice) doesn't work.



    I just recently moved to the VX4500/V02 f/w and find that my phone
    disconnects when the other party hangs up. I am in-between headsets
    right now, but think that worked the same way with the headset too.

    Perhaps you can get this functionality by updating your firmware. ??

    I just tried on my phone and it disconnected regardless whether I was
    the caller or the callee. (with auto answer set off, driving mode on).

    Set auto-answer to 1 or 3 rings and you don't even need the headset to
    use the speaker phone with the flip closed. Again, my 4500 disconnects
    when the calling party hangs up.
     
  12. speedlever

    speedlever Guest

    "C C" <someone@microsoft.com> wrote in
    news:OGUFc.32570$eH1.15439962@newssvr28.news.prodigy.com:

    > Hello. I have VX4500 and this phone can be set to "Driving mode",
    > Anyway, when you are
    > finished with your call, you have to flip open the folder and (with
    > the phone holstered in your belt) you have to press the End key.
    >
    > The manual on pages 22 and 23 says that to end a call (both incoming
    > and outgoing) you may press the End key or the side key TWICE. The
    > side key (twice) doesn't work.



    I just recently moved to the VX4500/V02 f/w and find that my phone
    disconnects when the other party hangs up. I am in-between headsets
    right now, but think that worked the same way with the headset too.

    Perhaps you can get this functionality by updating your firmware. ??

    I just tried on my phone and it disconnected regardless whether I was
    the caller or the callee. (with auto answer set off, driving mode on).

    Set auto-answer to 1 or 3 rings and you don't even need the headset to
    use the speaker phone with the flip closed. Again, my 4500 disconnects
    when the calling party hangs up.
     
  13. speedlever

    speedlever Guest

    "C C" <someone@microsoft.com> wrote in
    news:OGUFc.32570$eH1.15439962@newssvr28.news.prodigy.com:

    > Hello. I have VX4500 and this phone can be set to "Driving mode",
    > Anyway, when you are
    > finished with your call, you have to flip open the folder and (with
    > the phone holstered in your belt) you have to press the End key.
    >
    > The manual on pages 22 and 23 says that to end a call (both incoming
    > and outgoing) you may press the End key or the side key TWICE. The
    > side key (twice) doesn't work.



    I just recently moved to the VX4500/V02 f/w and find that my phone
    disconnects when the other party hangs up. I am in-between headsets
    right now, but think that worked the same way with the headset too.

    Perhaps you can get this functionality by updating your firmware. ??

    I just tried on my phone and it disconnected regardless whether I was
    the caller or the callee. (with auto answer set off, driving mode on).

    Set auto-answer to 1 or 3 rings and you don't even need the headset to
    use the speaker phone with the flip closed. Again, my 4500 disconnects
    when the calling party hangs up.
     
  14. speedlever

    speedlever Guest

    "C C" <someone@microsoft.com> wrote in
    news:OGUFc.32570$eH1.15439962@newssvr28.news.prodigy.com:

    > Hello. I have VX4500 and this phone can be set to "Driving mode",
    > Anyway, when you are
    > finished with your call, you have to flip open the folder and (with
    > the phone holstered in your belt) you have to press the End key.
    >
    > The manual on pages 22 and 23 says that to end a call (both incoming
    > and outgoing) you may press the End key or the side key TWICE. The
    > side key (twice) doesn't work.



    I just recently moved to the VX4500/V02 f/w and find that my phone
    disconnects when the other party hangs up. I am in-between headsets
    right now, but think that worked the same way with the headset too.

    Perhaps you can get this functionality by updating your firmware. ??

    I just tried on my phone and it disconnected regardless whether I was
    the caller or the callee. (with auto answer set off, driving mode on).

    Set auto-answer to 1 or 3 rings and you don't even need the headset to
    use the speaker phone with the flip closed. Again, my 4500 disconnects
    when the calling party hangs up.
     
  15. speedlever

    speedlever Guest

    "C C" <someone@microsoft.com> wrote in
    news:OGUFc.32570$eH1.15439962@newssvr28.news.prodigy.com:

    > Hello. I have VX4500 and this phone can be set to "Driving mode",
    > Anyway, when you are
    > finished with your call, you have to flip open the folder and (with
    > the phone holstered in your belt) you have to press the End key.
    >
    > The manual on pages 22 and 23 says that to end a call (both incoming
    > and outgoing) you may press the End key or the side key TWICE. The
    > side key (twice) doesn't work.



    I just recently moved to the VX4500/V02 f/w and find that my phone
    disconnects when the other party hangs up. I am in-between headsets
    right now, but think that worked the same way with the headset too.

    Perhaps you can get this functionality by updating your firmware. ??

    I just tried on my phone and it disconnected regardless whether I was
    the caller or the callee. (with auto answer set off, driving mode on).

    Set auto-answer to 1 or 3 rings and you don't even need the headset to
    use the speaker phone with the flip closed. Again, my 4500 disconnects
    when the calling party hangs up.
     
  16. speedlever

    speedlever Guest

    "C C" <someone@microsoft.com> wrote in
    news:OGUFc.32570$eH1.15439962@newssvr28.news.prodigy.com:

    > Hello. I have VX4500 and this phone can be set to "Driving mode",
    > Anyway, when you are
    > finished with your call, you have to flip open the folder and (with
    > the phone holstered in your belt) you have to press the End key.
    >
    > The manual on pages 22 and 23 says that to end a call (both incoming
    > and outgoing) you may press the End key or the side key TWICE. The
    > side key (twice) doesn't work.



    I just recently moved to the VX4500/V02 f/w and find that my phone
    disconnects when the other party hangs up. I am in-between headsets
    right now, but think that worked the same way with the headset too.

    Perhaps you can get this functionality by updating your firmware. ??

    I just tried on my phone and it disconnected regardless whether I was
    the caller or the callee. (with auto answer set off, driving mode on).

    Set auto-answer to 1 or 3 rings and you don't even need the headset to
    use the speaker phone with the flip closed. Again, my 4500 disconnects
    when the calling party hangs up.
     
  17. speedlever

    speedlever Guest

    "C C" <someone@microsoft.com> wrote in
    news:OGUFc.32570$eH1.15439962@newssvr28.news.prodigy.com:

    > Hello. I have VX4500 and this phone can be set to "Driving mode",
    > Anyway, when you are
    > finished with your call, you have to flip open the folder and (with
    > the phone holstered in your belt) you have to press the End key.
    >
    > The manual on pages 22 and 23 says that to end a call (both incoming
    > and outgoing) you may press the End key or the side key TWICE. The
    > side key (twice) doesn't work.



    I just recently moved to the VX4500/V02 f/w and find that my phone
    disconnects when the other party hangs up. I am in-between headsets
    right now, but think that worked the same way with the headset too.

    Perhaps you can get this functionality by updating your firmware. ??

    I just tried on my phone and it disconnected regardless whether I was
    the caller or the callee. (with auto answer set off, driving mode on).

    Set auto-answer to 1 or 3 rings and you don't even need the headset to
    use the speaker phone with the flip closed. Again, my 4500 disconnects
    when the calling party hangs up.
     
  18. speedlever

    speedlever Guest

    "C C" <someone@microsoft.com> wrote in
    news:OGUFc.32570$eH1.15439962@newssvr28.news.prodigy.com:

    > Hello. I have VX4500 and this phone can be set to "Driving mode",
    > Anyway, when you are
    > finished with your call, you have to flip open the folder and (with
    > the phone holstered in your belt) you have to press the End key.
    >
    > The manual on pages 22 and 23 says that to end a call (both incoming
    > and outgoing) you may press the End key or the side key TWICE. The
    > side key (twice) doesn't work.



    I just recently moved to the VX4500/V02 f/w and find that my phone
    disconnects when the other party hangs up. I am in-between headsets
    right now, but think that worked the same way with the headset too.

    Perhaps you can get this functionality by updating your firmware. ??

    I just tried on my phone and it disconnected regardless whether I was
    the caller or the callee. (with auto answer set off, driving mode on).

    Set auto-answer to 1 or 3 rings and you don't even need the headset to
    use the speaker phone with the flip closed. Again, my 4500 disconnects
    when the calling party hangs up.
     
  19. speedlever

    speedlever Guest

    "C C" <someone@microsoft.com> wrote in
    news:OGUFc.32570$eH1.15439962@newssvr28.news.prodigy.com:

    > Hello. I have VX4500 and this phone can be set to "Driving mode",
    > Anyway, when you are
    > finished with your call, you have to flip open the folder and (with
    > the phone holstered in your belt) you have to press the End key.
    >
    > The manual on pages 22 and 23 says that to end a call (both incoming
    > and outgoing) you may press the End key or the side key TWICE. The
    > side key (twice) doesn't work.



    I just recently moved to the VX4500/V02 f/w and find that my phone
    disconnects when the other party hangs up. I am in-between headsets
    right now, but think that worked the same way with the headset too.

    Perhaps you can get this functionality by updating your firmware. ??

    I just tried on my phone and it disconnected regardless whether I was
    the caller or the callee. (with auto answer set off, driving mode on).

    Set auto-answer to 1 or 3 rings and you don't even need the headset to
    use the speaker phone with the flip closed. Again, my 4500 disconnects
    when the calling party hangs up.
     
  20. speedlever

    speedlever Guest

    "C C" <someone@microsoft.com> wrote in
    news:OGUFc.32570$eH1.15439962@newssvr28.news.prodigy.com:

    > Hello. I have VX4500 and this phone can be set to "Driving mode",
    > Anyway, when you are
    > finished with your call, you have to flip open the folder and (with
    > the phone holstered in your belt) you have to press the End key.
    >
    > The manual on pages 22 and 23 says that to end a call (both incoming
    > and outgoing) you may press the End key or the side key TWICE. The
    > side key (twice) doesn't work.



    I just recently moved to the VX4500/V02 f/w and find that my phone
    disconnects when the other party hangs up. I am in-between headsets
    right now, but think that worked the same way with the headset too.

    Perhaps you can get this functionality by updating your firmware. ??

    I just tried on my phone and it disconnected regardless whether I was
    the caller or the callee. (with auto answer set off, driving mode on).

    Set auto-answer to 1 or 3 rings and you don't even need the headset to
    use the speaker phone with the flip closed. Again, my 4500 disconnects
    when the calling party hangs up.
     

Welcome to VerizonForums!

Unfortunately you can't reply until you log in or sign up.


Forgot your password?