1. Welcome to Verizon Forums - the unofficial Verizon community! Have a question about Verizon? Click HERE to get started.
    Dismiss Notice
  2. Expecting Cell Phone Forums? We recently moved Verizon specific content to VerizonForums.com. If you previously had an account on CPF, it has been transferred!
    Dismiss Notice

Hanging up VX4500 in Driving Mode

Discussion in 'alt.cellular.verizon' started by C C, Jul 4, 2004.

  1. No Reply

    No Reply Guest

    speedlever wrote:

    > "C C" <someone@microsoft.com> wrote in
    > news:OGUFc.32570$eH1.15439962@newssvr28.news.prodigy.com:
    >
    >
    >>Hello. I have VX4500 and this phone can be set to "Driving mode",
    >> Anyway, when you are
    >>finished with your call, you have to flip open the folder and (with
    >>the phone holstered in your belt) you have to press the End key.
    >>
    >>The manual on pages 22 and 23 says that to end a call (both incoming
    >>and outgoing) you may press the End key or the side key TWICE. The
    >>side key (twice) doesn't work.

    >
    >
    >
    > I just recently moved to the VX4500/V02 f/w and find that my phone
    > disconnects when the other party hangs up. I am in-between headsets
    > right now, but think that worked the same way with the headset too.
    >
    > Perhaps you can get this functionality by updating your firmware. ??
    >
    > I just tried on my phone and it disconnected regardless whether I was
    > the caller or the callee. (with auto answer set off, driving mode on).
    >
    > Set auto-answer to 1 or 3 rings and you don't even need the headset to
    > use the speaker phone with the flip closed. Again, my 4500 disconnects
    > when the calling party hangs up.
    >


    With the flip closed, the mic is covered up. It may work fine on your
    end, but the people you call won't be able to hear you very well, if
    they can hear you at all.
     



    › See More: Hanging up VX4500 in Driving Mode
  2. No Reply

    No Reply Guest

    speedlever wrote:

    > "C C" <someone@microsoft.com> wrote in
    > news:OGUFc.32570$eH1.15439962@newssvr28.news.prodigy.com:
    >
    >
    >>Hello. I have VX4500 and this phone can be set to "Driving mode",
    >> Anyway, when you are
    >>finished with your call, you have to flip open the folder and (with
    >>the phone holstered in your belt) you have to press the End key.
    >>
    >>The manual on pages 22 and 23 says that to end a call (both incoming
    >>and outgoing) you may press the End key or the side key TWICE. The
    >>side key (twice) doesn't work.

    >
    >
    >
    > I just recently moved to the VX4500/V02 f/w and find that my phone
    > disconnects when the other party hangs up. I am in-between headsets
    > right now, but think that worked the same way with the headset too.
    >
    > Perhaps you can get this functionality by updating your firmware. ??
    >
    > I just tried on my phone and it disconnected regardless whether I was
    > the caller or the callee. (with auto answer set off, driving mode on).
    >
    > Set auto-answer to 1 or 3 rings and you don't even need the headset to
    > use the speaker phone with the flip closed. Again, my 4500 disconnects
    > when the calling party hangs up.
    >


    With the flip closed, the mic is covered up. It may work fine on your
    end, but the people you call won't be able to hear you very well, if
    they can hear you at all.
     
  3. No Reply

    No Reply Guest

    speedlever wrote:

    > "C C" <someone@microsoft.com> wrote in
    > news:OGUFc.32570$eH1.15439962@newssvr28.news.prodigy.com:
    >
    >
    >>Hello. I have VX4500 and this phone can be set to "Driving mode",
    >> Anyway, when you are
    >>finished with your call, you have to flip open the folder and (with
    >>the phone holstered in your belt) you have to press the End key.
    >>
    >>The manual on pages 22 and 23 says that to end a call (both incoming
    >>and outgoing) you may press the End key or the side key TWICE. The
    >>side key (twice) doesn't work.

    >
    >
    >
    > I just recently moved to the VX4500/V02 f/w and find that my phone
    > disconnects when the other party hangs up. I am in-between headsets
    > right now, but think that worked the same way with the headset too.
    >
    > Perhaps you can get this functionality by updating your firmware. ??
    >
    > I just tried on my phone and it disconnected regardless whether I was
    > the caller or the callee. (with auto answer set off, driving mode on).
    >
    > Set auto-answer to 1 or 3 rings and you don't even need the headset to
    > use the speaker phone with the flip closed. Again, my 4500 disconnects
    > when the calling party hangs up.
    >


    With the flip closed, the mic is covered up. It may work fine on your
    end, but the people you call won't be able to hear you very well, if
    they can hear you at all.
     
  4. No Reply

    No Reply Guest

    speedlever wrote:

    > "C C" <someone@microsoft.com> wrote in
    > news:OGUFc.32570$eH1.15439962@newssvr28.news.prodigy.com:
    >
    >
    >>Hello. I have VX4500 and this phone can be set to "Driving mode",
    >> Anyway, when you are
    >>finished with your call, you have to flip open the folder and (with
    >>the phone holstered in your belt) you have to press the End key.
    >>
    >>The manual on pages 22 and 23 says that to end a call (both incoming
    >>and outgoing) you may press the End key or the side key TWICE. The
    >>side key (twice) doesn't work.

    >
    >
    >
    > I just recently moved to the VX4500/V02 f/w and find that my phone
    > disconnects when the other party hangs up. I am in-between headsets
    > right now, but think that worked the same way with the headset too.
    >
    > Perhaps you can get this functionality by updating your firmware. ??
    >
    > I just tried on my phone and it disconnected regardless whether I was
    > the caller or the callee. (with auto answer set off, driving mode on).
    >
    > Set auto-answer to 1 or 3 rings and you don't even need the headset to
    > use the speaker phone with the flip closed. Again, my 4500 disconnects
    > when the calling party hangs up.
    >


    With the flip closed, the mic is covered up. It may work fine on your
    end, but the people you call won't be able to hear you very well, if
    they can hear you at all.
     
  5. No Reply

    No Reply Guest

    speedlever wrote:

    > "C C" <someone@microsoft.com> wrote in
    > news:OGUFc.32570$eH1.15439962@newssvr28.news.prodigy.com:
    >
    >
    >>Hello. I have VX4500 and this phone can be set to "Driving mode",
    >> Anyway, when you are
    >>finished with your call, you have to flip open the folder and (with
    >>the phone holstered in your belt) you have to press the End key.
    >>
    >>The manual on pages 22 and 23 says that to end a call (both incoming
    >>and outgoing) you may press the End key or the side key TWICE. The
    >>side key (twice) doesn't work.

    >
    >
    >
    > I just recently moved to the VX4500/V02 f/w and find that my phone
    > disconnects when the other party hangs up. I am in-between headsets
    > right now, but think that worked the same way with the headset too.
    >
    > Perhaps you can get this functionality by updating your firmware. ??
    >
    > I just tried on my phone and it disconnected regardless whether I was
    > the caller or the callee. (with auto answer set off, driving mode on).
    >
    > Set auto-answer to 1 or 3 rings and you don't even need the headset to
    > use the speaker phone with the flip closed. Again, my 4500 disconnects
    > when the calling party hangs up.
    >


    With the flip closed, the mic is covered up. It may work fine on your
    end, but the people you call won't be able to hear you very well, if
    they can hear you at all.
     
  6. No Reply

    No Reply Guest

    speedlever wrote:

    > "C C" <someone@microsoft.com> wrote in
    > news:OGUFc.32570$eH1.15439962@newssvr28.news.prodigy.com:
    >
    >
    >>Hello. I have VX4500 and this phone can be set to "Driving mode",
    >> Anyway, when you are
    >>finished with your call, you have to flip open the folder and (with
    >>the phone holstered in your belt) you have to press the End key.
    >>
    >>The manual on pages 22 and 23 says that to end a call (both incoming
    >>and outgoing) you may press the End key or the side key TWICE. The
    >>side key (twice) doesn't work.

    >
    >
    >
    > I just recently moved to the VX4500/V02 f/w and find that my phone
    > disconnects when the other party hangs up. I am in-between headsets
    > right now, but think that worked the same way with the headset too.
    >
    > Perhaps you can get this functionality by updating your firmware. ??
    >
    > I just tried on my phone and it disconnected regardless whether I was
    > the caller or the callee. (with auto answer set off, driving mode on).
    >
    > Set auto-answer to 1 or 3 rings and you don't even need the headset to
    > use the speaker phone with the flip closed. Again, my 4500 disconnects
    > when the calling party hangs up.
    >


    With the flip closed, the mic is covered up. It may work fine on your
    end, but the people you call won't be able to hear you very well, if
    they can hear you at all.
     
  7. No Reply

    No Reply Guest

    speedlever wrote:

    > "C C" <someone@microsoft.com> wrote in
    > news:OGUFc.32570$eH1.15439962@newssvr28.news.prodigy.com:
    >
    >
    >>Hello. I have VX4500 and this phone can be set to "Driving mode",
    >> Anyway, when you are
    >>finished with your call, you have to flip open the folder and (with
    >>the phone holstered in your belt) you have to press the End key.
    >>
    >>The manual on pages 22 and 23 says that to end a call (both incoming
    >>and outgoing) you may press the End key or the side key TWICE. The
    >>side key (twice) doesn't work.

    >
    >
    >
    > I just recently moved to the VX4500/V02 f/w and find that my phone
    > disconnects when the other party hangs up. I am in-between headsets
    > right now, but think that worked the same way with the headset too.
    >
    > Perhaps you can get this functionality by updating your firmware. ??
    >
    > I just tried on my phone and it disconnected regardless whether I was
    > the caller or the callee. (with auto answer set off, driving mode on).
    >
    > Set auto-answer to 1 or 3 rings and you don't even need the headset to
    > use the speaker phone with the flip closed. Again, my 4500 disconnects
    > when the calling party hangs up.
    >


    With the flip closed, the mic is covered up. It may work fine on your
    end, but the people you call won't be able to hear you very well, if
    they can hear you at all.
     
  8. No Reply

    No Reply Guest

    speedlever wrote:

    > "C C" <someone@microsoft.com> wrote in
    > news:OGUFc.32570$eH1.15439962@newssvr28.news.prodigy.com:
    >
    >
    >>Hello. I have VX4500 and this phone can be set to "Driving mode",
    >> Anyway, when you are
    >>finished with your call, you have to flip open the folder and (with
    >>the phone holstered in your belt) you have to press the End key.
    >>
    >>The manual on pages 22 and 23 says that to end a call (both incoming
    >>and outgoing) you may press the End key or the side key TWICE. The
    >>side key (twice) doesn't work.

    >
    >
    >
    > I just recently moved to the VX4500/V02 f/w and find that my phone
    > disconnects when the other party hangs up. I am in-between headsets
    > right now, but think that worked the same way with the headset too.
    >
    > Perhaps you can get this functionality by updating your firmware. ??
    >
    > I just tried on my phone and it disconnected regardless whether I was
    > the caller or the callee. (with auto answer set off, driving mode on).
    >
    > Set auto-answer to 1 or 3 rings and you don't even need the headset to
    > use the speaker phone with the flip closed. Again, my 4500 disconnects
    > when the calling party hangs up.
    >


    With the flip closed, the mic is covered up. It may work fine on your
    end, but the people you call won't be able to hear you very well, if
    they can hear you at all.
     
  9. No Reply

    No Reply Guest

    speedlever wrote:

    > "C C" <someone@microsoft.com> wrote in
    > news:OGUFc.32570$eH1.15439962@newssvr28.news.prodigy.com:
    >
    >
    >>Hello. I have VX4500 and this phone can be set to "Driving mode",
    >> Anyway, when you are
    >>finished with your call, you have to flip open the folder and (with
    >>the phone holstered in your belt) you have to press the End key.
    >>
    >>The manual on pages 22 and 23 says that to end a call (both incoming
    >>and outgoing) you may press the End key or the side key TWICE. The
    >>side key (twice) doesn't work.

    >
    >
    >
    > I just recently moved to the VX4500/V02 f/w and find that my phone
    > disconnects when the other party hangs up. I am in-between headsets
    > right now, but think that worked the same way with the headset too.
    >
    > Perhaps you can get this functionality by updating your firmware. ??
    >
    > I just tried on my phone and it disconnected regardless whether I was
    > the caller or the callee. (with auto answer set off, driving mode on).
    >
    > Set auto-answer to 1 or 3 rings and you don't even need the headset to
    > use the speaker phone with the flip closed. Again, my 4500 disconnects
    > when the calling party hangs up.
    >


    With the flip closed, the mic is covered up. It may work fine on your
    end, but the people you call won't be able to hear you very well, if
    they can hear you at all.
     
  10. No Reply

    No Reply Guest

    speedlever wrote:

    > "C C" <someone@microsoft.com> wrote in
    > news:OGUFc.32570$eH1.15439962@newssvr28.news.prodigy.com:
    >
    >
    >>Hello. I have VX4500 and this phone can be set to "Driving mode",
    >> Anyway, when you are
    >>finished with your call, you have to flip open the folder and (with
    >>the phone holstered in your belt) you have to press the End key.
    >>
    >>The manual on pages 22 and 23 says that to end a call (both incoming
    >>and outgoing) you may press the End key or the side key TWICE. The
    >>side key (twice) doesn't work.

    >
    >
    >
    > I just recently moved to the VX4500/V02 f/w and find that my phone
    > disconnects when the other party hangs up. I am in-between headsets
    > right now, but think that worked the same way with the headset too.
    >
    > Perhaps you can get this functionality by updating your firmware. ??
    >
    > I just tried on my phone and it disconnected regardless whether I was
    > the caller or the callee. (with auto answer set off, driving mode on).
    >
    > Set auto-answer to 1 or 3 rings and you don't even need the headset to
    > use the speaker phone with the flip closed. Again, my 4500 disconnects
    > when the calling party hangs up.
    >


    With the flip closed, the mic is covered up. It may work fine on your
    end, but the people you call won't be able to hear you very well, if
    they can hear you at all.
     
  11. No Reply

    No Reply Guest

    speedlever wrote:

    > "C C" <someone@microsoft.com> wrote in
    > news:OGUFc.32570$eH1.15439962@newssvr28.news.prodigy.com:
    >
    >
    >>Hello. I have VX4500 and this phone can be set to "Driving mode",
    >> Anyway, when you are
    >>finished with your call, you have to flip open the folder and (with
    >>the phone holstered in your belt) you have to press the End key.
    >>
    >>The manual on pages 22 and 23 says that to end a call (both incoming
    >>and outgoing) you may press the End key or the side key TWICE. The
    >>side key (twice) doesn't work.

    >
    >
    >
    > I just recently moved to the VX4500/V02 f/w and find that my phone
    > disconnects when the other party hangs up. I am in-between headsets
    > right now, but think that worked the same way with the headset too.
    >
    > Perhaps you can get this functionality by updating your firmware. ??
    >
    > I just tried on my phone and it disconnected regardless whether I was
    > the caller or the callee. (with auto answer set off, driving mode on).
    >
    > Set auto-answer to 1 or 3 rings and you don't even need the headset to
    > use the speaker phone with the flip closed. Again, my 4500 disconnects
    > when the calling party hangs up.
    >


    With the flip closed, the mic is covered up. It may work fine on your
    end, but the people you call won't be able to hear you very well, if
    they can hear you at all.
     
  12. No Reply

    No Reply Guest

    speedlever wrote:

    > "C C" <someone@microsoft.com> wrote in
    > news:OGUFc.32570$eH1.15439962@newssvr28.news.prodigy.com:
    >
    >
    >>Hello. I have VX4500 and this phone can be set to "Driving mode",
    >> Anyway, when you are
    >>finished with your call, you have to flip open the folder and (with
    >>the phone holstered in your belt) you have to press the End key.
    >>
    >>The manual on pages 22 and 23 says that to end a call (both incoming
    >>and outgoing) you may press the End key or the side key TWICE. The
    >>side key (twice) doesn't work.

    >
    >
    >
    > I just recently moved to the VX4500/V02 f/w and find that my phone
    > disconnects when the other party hangs up. I am in-between headsets
    > right now, but think that worked the same way with the headset too.
    >
    > Perhaps you can get this functionality by updating your firmware. ??
    >
    > I just tried on my phone and it disconnected regardless whether I was
    > the caller or the callee. (with auto answer set off, driving mode on).
    >
    > Set auto-answer to 1 or 3 rings and you don't even need the headset to
    > use the speaker phone with the flip closed. Again, my 4500 disconnects
    > when the calling party hangs up.
    >


    With the flip closed, the mic is covered up. It may work fine on your
    end, but the people you call won't be able to hear you very well, if
    they can hear you at all.
     
  13. No Reply

    No Reply Guest

    speedlever wrote:

    > "C C" <someone@microsoft.com> wrote in
    > news:OGUFc.32570$eH1.15439962@newssvr28.news.prodigy.com:
    >
    >
    >>Hello. I have VX4500 and this phone can be set to "Driving mode",
    >> Anyway, when you are
    >>finished with your call, you have to flip open the folder and (with
    >>the phone holstered in your belt) you have to press the End key.
    >>
    >>The manual on pages 22 and 23 says that to end a call (both incoming
    >>and outgoing) you may press the End key or the side key TWICE. The
    >>side key (twice) doesn't work.

    >
    >
    >
    > I just recently moved to the VX4500/V02 f/w and find that my phone
    > disconnects when the other party hangs up. I am in-between headsets
    > right now, but think that worked the same way with the headset too.
    >
    > Perhaps you can get this functionality by updating your firmware. ??
    >
    > I just tried on my phone and it disconnected regardless whether I was
    > the caller or the callee. (with auto answer set off, driving mode on).
    >
    > Set auto-answer to 1 or 3 rings and you don't even need the headset to
    > use the speaker phone with the flip closed. Again, my 4500 disconnects
    > when the calling party hangs up.
    >


    With the flip closed, the mic is covered up. It may work fine on your
    end, but the people you call won't be able to hear you very well, if
    they can hear you at all.
     
  14. No Reply

    No Reply Guest

    speedlever wrote:

    > "C C" <someone@microsoft.com> wrote in
    > news:OGUFc.32570$eH1.15439962@newssvr28.news.prodigy.com:
    >
    >
    >>Hello. I have VX4500 and this phone can be set to "Driving mode",
    >> Anyway, when you are
    >>finished with your call, you have to flip open the folder and (with
    >>the phone holstered in your belt) you have to press the End key.
    >>
    >>The manual on pages 22 and 23 says that to end a call (both incoming
    >>and outgoing) you may press the End key or the side key TWICE. The
    >>side key (twice) doesn't work.

    >
    >
    >
    > I just recently moved to the VX4500/V02 f/w and find that my phone
    > disconnects when the other party hangs up. I am in-between headsets
    > right now, but think that worked the same way with the headset too.
    >
    > Perhaps you can get this functionality by updating your firmware. ??
    >
    > I just tried on my phone and it disconnected regardless whether I was
    > the caller or the callee. (with auto answer set off, driving mode on).
    >
    > Set auto-answer to 1 or 3 rings and you don't even need the headset to
    > use the speaker phone with the flip closed. Again, my 4500 disconnects
    > when the calling party hangs up.
    >


    With the flip closed, the mic is covered up. It may work fine on your
    end, but the people you call won't be able to hear you very well, if
    they can hear you at all.
     
  15. No Reply

    No Reply Guest

    speedlever wrote:

    > "C C" <someone@microsoft.com> wrote in
    > news:OGUFc.32570$eH1.15439962@newssvr28.news.prodigy.com:
    >
    >
    >>Hello. I have VX4500 and this phone can be set to "Driving mode",
    >> Anyway, when you are
    >>finished with your call, you have to flip open the folder and (with
    >>the phone holstered in your belt) you have to press the End key.
    >>
    >>The manual on pages 22 and 23 says that to end a call (both incoming
    >>and outgoing) you may press the End key or the side key TWICE. The
    >>side key (twice) doesn't work.

    >
    >
    >
    > I just recently moved to the VX4500/V02 f/w and find that my phone
    > disconnects when the other party hangs up. I am in-between headsets
    > right now, but think that worked the same way with the headset too.
    >
    > Perhaps you can get this functionality by updating your firmware. ??
    >
    > I just tried on my phone and it disconnected regardless whether I was
    > the caller or the callee. (with auto answer set off, driving mode on).
    >
    > Set auto-answer to 1 or 3 rings and you don't even need the headset to
    > use the speaker phone with the flip closed. Again, my 4500 disconnects
    > when the calling party hangs up.
    >


    With the flip closed, the mic is covered up. It may work fine on your
    end, but the people you call won't be able to hear you very well, if
    they can hear you at all.
     
  16. No Reply

    No Reply Guest

    speedlever wrote:

    > "C C" <someone@microsoft.com> wrote in
    > news:OGUFc.32570$eH1.15439962@newssvr28.news.prodigy.com:
    >
    >
    >>Hello. I have VX4500 and this phone can be set to "Driving mode",
    >> Anyway, when you are
    >>finished with your call, you have to flip open the folder and (with
    >>the phone holstered in your belt) you have to press the End key.
    >>
    >>The manual on pages 22 and 23 says that to end a call (both incoming
    >>and outgoing) you may press the End key or the side key TWICE. The
    >>side key (twice) doesn't work.

    >
    >
    >
    > I just recently moved to the VX4500/V02 f/w and find that my phone
    > disconnects when the other party hangs up. I am in-between headsets
    > right now, but think that worked the same way with the headset too.
    >
    > Perhaps you can get this functionality by updating your firmware. ??
    >
    > I just tried on my phone and it disconnected regardless whether I was
    > the caller or the callee. (with auto answer set off, driving mode on).
    >
    > Set auto-answer to 1 or 3 rings and you don't even need the headset to
    > use the speaker phone with the flip closed. Again, my 4500 disconnects
    > when the calling party hangs up.
    >


    With the flip closed, the mic is covered up. It may work fine on your
    end, but the people you call won't be able to hear you very well, if
    they can hear you at all.
     
  17. No Reply

    No Reply Guest

    speedlever wrote:

    > "C C" <someone@microsoft.com> wrote in
    > news:OGUFc.32570$eH1.15439962@newssvr28.news.prodigy.com:
    >
    >
    >>Hello. I have VX4500 and this phone can be set to "Driving mode",
    >> Anyway, when you are
    >>finished with your call, you have to flip open the folder and (with
    >>the phone holstered in your belt) you have to press the End key.
    >>
    >>The manual on pages 22 and 23 says that to end a call (both incoming
    >>and outgoing) you may press the End key or the side key TWICE. The
    >>side key (twice) doesn't work.

    >
    >
    >
    > I just recently moved to the VX4500/V02 f/w and find that my phone
    > disconnects when the other party hangs up. I am in-between headsets
    > right now, but think that worked the same way with the headset too.
    >
    > Perhaps you can get this functionality by updating your firmware. ??
    >
    > I just tried on my phone and it disconnected regardless whether I was
    > the caller or the callee. (with auto answer set off, driving mode on).
    >
    > Set auto-answer to 1 or 3 rings and you don't even need the headset to
    > use the speaker phone with the flip closed. Again, my 4500 disconnects
    > when the calling party hangs up.
    >


    With the flip closed, the mic is covered up. It may work fine on your
    end, but the people you call won't be able to hear you very well, if
    they can hear you at all.
     
  18. No Reply

    No Reply Guest

    speedlever wrote:

    > "C C" <someone@microsoft.com> wrote in
    > news:OGUFc.32570$eH1.15439962@newssvr28.news.prodigy.com:
    >
    >
    >>Hello. I have VX4500 and this phone can be set to "Driving mode",
    >> Anyway, when you are
    >>finished with your call, you have to flip open the folder and (with
    >>the phone holstered in your belt) you have to press the End key.
    >>
    >>The manual on pages 22 and 23 says that to end a call (both incoming
    >>and outgoing) you may press the End key or the side key TWICE. The
    >>side key (twice) doesn't work.

    >
    >
    >
    > I just recently moved to the VX4500/V02 f/w and find that my phone
    > disconnects when the other party hangs up. I am in-between headsets
    > right now, but think that worked the same way with the headset too.
    >
    > Perhaps you can get this functionality by updating your firmware. ??
    >
    > I just tried on my phone and it disconnected regardless whether I was
    > the caller or the callee. (with auto answer set off, driving mode on).
    >
    > Set auto-answer to 1 or 3 rings and you don't even need the headset to
    > use the speaker phone with the flip closed. Again, my 4500 disconnects
    > when the calling party hangs up.
    >


    With the flip closed, the mic is covered up. It may work fine on your
    end, but the people you call won't be able to hear you very well, if
    they can hear you at all.
     
  19. No Reply

    No Reply Guest

    speedlever wrote:

    > "C C" <someone@microsoft.com> wrote in
    > news:OGUFc.32570$eH1.15439962@newssvr28.news.prodigy.com:
    >
    >
    >>Hello. I have VX4500 and this phone can be set to "Driving mode",
    >> Anyway, when you are
    >>finished with your call, you have to flip open the folder and (with
    >>the phone holstered in your belt) you have to press the End key.
    >>
    >>The manual on pages 22 and 23 says that to end a call (both incoming
    >>and outgoing) you may press the End key or the side key TWICE. The
    >>side key (twice) doesn't work.

    >
    >
    >
    > I just recently moved to the VX4500/V02 f/w and find that my phone
    > disconnects when the other party hangs up. I am in-between headsets
    > right now, but think that worked the same way with the headset too.
    >
    > Perhaps you can get this functionality by updating your firmware. ??
    >
    > I just tried on my phone and it disconnected regardless whether I was
    > the caller or the callee. (with auto answer set off, driving mode on).
    >
    > Set auto-answer to 1 or 3 rings and you don't even need the headset to
    > use the speaker phone with the flip closed. Again, my 4500 disconnects
    > when the calling party hangs up.
    >


    With the flip closed, the mic is covered up. It may work fine on your
    end, but the people you call won't be able to hear you very well, if
    they can hear you at all.
     
  20. No Reply

    No Reply Guest

    speedlever wrote:

    > "C C" <someone@microsoft.com> wrote in
    > news:OGUFc.32570$eH1.15439962@newssvr28.news.prodigy.com:
    >
    >
    >>Hello. I have VX4500 and this phone can be set to "Driving mode",
    >> Anyway, when you are
    >>finished with your call, you have to flip open the folder and (with
    >>the phone holstered in your belt) you have to press the End key.
    >>
    >>The manual on pages 22 and 23 says that to end a call (both incoming
    >>and outgoing) you may press the End key or the side key TWICE. The
    >>side key (twice) doesn't work.

    >
    >
    >
    > I just recently moved to the VX4500/V02 f/w and find that my phone
    > disconnects when the other party hangs up. I am in-between headsets
    > right now, but think that worked the same way with the headset too.
    >
    > Perhaps you can get this functionality by updating your firmware. ??
    >
    > I just tried on my phone and it disconnected regardless whether I was
    > the caller or the callee. (with auto answer set off, driving mode on).
    >
    > Set auto-answer to 1 or 3 rings and you don't even need the headset to
    > use the speaker phone with the flip closed. Again, my 4500 disconnects
    > when the calling party hangs up.
    >


    With the flip closed, the mic is covered up. It may work fine on your
    end, but the people you call won't be able to hear you very well, if
    they can hear you at all.
     

Welcome to VerizonForums!

Unfortunately you can't reply until you log in or sign up.


Forgot your password?