1. Welcome to Verizon Forums - the unofficial Verizon community! Have a question about Verizon? Click HERE to get started.
    Dismiss Notice
  2. Expecting Cell Phone Forums? We recently moved Verizon specific content to VerizonForums.com. If you previously had an account on CPF, it has been transferred!
    Dismiss Notice

lg4400 Firmware

Discussion in 'alt.cellular.verizon' started by Viper, Jul 4, 2004.

  1. Wayne Farmer

    Wayne Farmer Guest

    "Viper" <user@123456.com> wrote in message
    news:F3XFc.10674$1F6.4017@fe37.usenetserver.com...
    > I have a lg4400 with firmware 11. What dose the 2 arrows mean that flash

    for
    > a few seconds when I am in Get It Now and Web? What dose the circle arrow
    > mean that flashes? The 2 arrows flash for a few seconds and then it goes

    to
    > the circle arrow. I had firmware 6 before I upgraded to version 11. I stay
    > in the 1x mode when I get the circle arrow. Is there something that needs

    to
    > be enabled on my account when I call verizon? Could some one explain the

    1x
    > and the arrow stuff. I do not understand. I am new at this.


    MENU-9-3 will show you the new icons for the V11 firmware:

    Bold double arrows is "1X Data Active"
    Unbold double arrows is "1X Data Dormant"
    Circle arrow is "QNC Data Active"

    I just upgraded my LG4400 from v6 firmware to v11 firmware, but I didn't
    need to get my phone replaced afterwards (which you described in your other
    message).

    However, I am seeing the same thing that you are: if I have 1X showing, and
    I access Get It Now or Mobile Web (not connected to a PC), the double arrows
    flash about 4 times, and then the circle arrow comes on and is present when
    data transfer is occurring.

    If 1X isn't showing (D is showing instead), then the double arrows don't
    come on, and just the circle arrow comes on.

    So, this tells me that, when 1X is showing, Get It Now and Mobile Web will
    try to use a 1X data session at first, but then fall back to use a QNC data
    session.

    (When the phone is used as a modem, I can establish a 3G data session from
    the PC, achieving rates as high as 13K bytes/second.)

    Now, I thought I remembered reading, back when v10 firmware first came out,
    that upgrading to v10 would speed up Get It Now and Mobile Web sessions by
    using 1X sessions instead of QNC sessions. That's what I was expecting, but
    Verizon's data customer service tells me that Get It Now and Mobile Web
    aren't speeded up by the upgrade from v6 to v11.

    Anybody know the answer? Is their something that I have to do or Verizon
    has to do to make my Get It Now and Mobile Web sessions use 1X sessions
    instead of QNC sessions?

    Wayne
     



    › See More: lg4400 Firmware
  2. Wayne Farmer

    Wayne Farmer Guest

    "Viper" <user@123456.com> wrote in message
    news:F3XFc.10674$1F6.4017@fe37.usenetserver.com...
    > I have a lg4400 with firmware 11. What dose the 2 arrows mean that flash

    for
    > a few seconds when I am in Get It Now and Web? What dose the circle arrow
    > mean that flashes? The 2 arrows flash for a few seconds and then it goes

    to
    > the circle arrow. I had firmware 6 before I upgraded to version 11. I stay
    > in the 1x mode when I get the circle arrow. Is there something that needs

    to
    > be enabled on my account when I call verizon? Could some one explain the

    1x
    > and the arrow stuff. I do not understand. I am new at this.


    MENU-9-3 will show you the new icons for the V11 firmware:

    Bold double arrows is "1X Data Active"
    Unbold double arrows is "1X Data Dormant"
    Circle arrow is "QNC Data Active"

    I just upgraded my LG4400 from v6 firmware to v11 firmware, but I didn't
    need to get my phone replaced afterwards (which you described in your other
    message).

    However, I am seeing the same thing that you are: if I have 1X showing, and
    I access Get It Now or Mobile Web (not connected to a PC), the double arrows
    flash about 4 times, and then the circle arrow comes on and is present when
    data transfer is occurring.

    If 1X isn't showing (D is showing instead), then the double arrows don't
    come on, and just the circle arrow comes on.

    So, this tells me that, when 1X is showing, Get It Now and Mobile Web will
    try to use a 1X data session at first, but then fall back to use a QNC data
    session.

    (When the phone is used as a modem, I can establish a 3G data session from
    the PC, achieving rates as high as 13K bytes/second.)

    Now, I thought I remembered reading, back when v10 firmware first came out,
    that upgrading to v10 would speed up Get It Now and Mobile Web sessions by
    using 1X sessions instead of QNC sessions. That's what I was expecting, but
    Verizon's data customer service tells me that Get It Now and Mobile Web
    aren't speeded up by the upgrade from v6 to v11.

    Anybody know the answer? Is their something that I have to do or Verizon
    has to do to make my Get It Now and Mobile Web sessions use 1X sessions
    instead of QNC sessions?

    Wayne
     
  3. Wayne Farmer

    Wayne Farmer Guest

    "Viper" <user@123456.com> wrote in message
    news:F3XFc.10674$1F6.4017@fe37.usenetserver.com...
    > I have a lg4400 with firmware 11. What dose the 2 arrows mean that flash

    for
    > a few seconds when I am in Get It Now and Web? What dose the circle arrow
    > mean that flashes? The 2 arrows flash for a few seconds and then it goes

    to
    > the circle arrow. I had firmware 6 before I upgraded to version 11. I stay
    > in the 1x mode when I get the circle arrow. Is there something that needs

    to
    > be enabled on my account when I call verizon? Could some one explain the

    1x
    > and the arrow stuff. I do not understand. I am new at this.


    MENU-9-3 will show you the new icons for the V11 firmware:

    Bold double arrows is "1X Data Active"
    Unbold double arrows is "1X Data Dormant"
    Circle arrow is "QNC Data Active"

    I just upgraded my LG4400 from v6 firmware to v11 firmware, but I didn't
    need to get my phone replaced afterwards (which you described in your other
    message).

    However, I am seeing the same thing that you are: if I have 1X showing, and
    I access Get It Now or Mobile Web (not connected to a PC), the double arrows
    flash about 4 times, and then the circle arrow comes on and is present when
    data transfer is occurring.

    If 1X isn't showing (D is showing instead), then the double arrows don't
    come on, and just the circle arrow comes on.

    So, this tells me that, when 1X is showing, Get It Now and Mobile Web will
    try to use a 1X data session at first, but then fall back to use a QNC data
    session.

    (When the phone is used as a modem, I can establish a 3G data session from
    the PC, achieving rates as high as 13K bytes/second.)

    Now, I thought I remembered reading, back when v10 firmware first came out,
    that upgrading to v10 would speed up Get It Now and Mobile Web sessions by
    using 1X sessions instead of QNC sessions. That's what I was expecting, but
    Verizon's data customer service tells me that Get It Now and Mobile Web
    aren't speeded up by the upgrade from v6 to v11.

    Anybody know the answer? Is their something that I have to do or Verizon
    has to do to make my Get It Now and Mobile Web sessions use 1X sessions
    instead of QNC sessions?

    Wayne
     
  4. Wayne Farmer

    Wayne Farmer Guest

    "Viper" <user@123456.com> wrote in message
    news:F3XFc.10674$1F6.4017@fe37.usenetserver.com...
    > I have a lg4400 with firmware 11. What dose the 2 arrows mean that flash

    for
    > a few seconds when I am in Get It Now and Web? What dose the circle arrow
    > mean that flashes? The 2 arrows flash for a few seconds and then it goes

    to
    > the circle arrow. I had firmware 6 before I upgraded to version 11. I stay
    > in the 1x mode when I get the circle arrow. Is there something that needs

    to
    > be enabled on my account when I call verizon? Could some one explain the

    1x
    > and the arrow stuff. I do not understand. I am new at this.


    MENU-9-3 will show you the new icons for the V11 firmware:

    Bold double arrows is "1X Data Active"
    Unbold double arrows is "1X Data Dormant"
    Circle arrow is "QNC Data Active"

    I just upgraded my LG4400 from v6 firmware to v11 firmware, but I didn't
    need to get my phone replaced afterwards (which you described in your other
    message).

    However, I am seeing the same thing that you are: if I have 1X showing, and
    I access Get It Now or Mobile Web (not connected to a PC), the double arrows
    flash about 4 times, and then the circle arrow comes on and is present when
    data transfer is occurring.

    If 1X isn't showing (D is showing instead), then the double arrows don't
    come on, and just the circle arrow comes on.

    So, this tells me that, when 1X is showing, Get It Now and Mobile Web will
    try to use a 1X data session at first, but then fall back to use a QNC data
    session.

    (When the phone is used as a modem, I can establish a 3G data session from
    the PC, achieving rates as high as 13K bytes/second.)

    Now, I thought I remembered reading, back when v10 firmware first came out,
    that upgrading to v10 would speed up Get It Now and Mobile Web sessions by
    using 1X sessions instead of QNC sessions. That's what I was expecting, but
    Verizon's data customer service tells me that Get It Now and Mobile Web
    aren't speeded up by the upgrade from v6 to v11.

    Anybody know the answer? Is their something that I have to do or Verizon
    has to do to make my Get It Now and Mobile Web sessions use 1X sessions
    instead of QNC sessions?

    Wayne
     
  5. Wayne Farmer

    Wayne Farmer Guest

    "Viper" <user@123456.com> wrote in message
    news:F3XFc.10674$1F6.4017@fe37.usenetserver.com...
    > I have a lg4400 with firmware 11. What dose the 2 arrows mean that flash

    for
    > a few seconds when I am in Get It Now and Web? What dose the circle arrow
    > mean that flashes? The 2 arrows flash for a few seconds and then it goes

    to
    > the circle arrow. I had firmware 6 before I upgraded to version 11. I stay
    > in the 1x mode when I get the circle arrow. Is there something that needs

    to
    > be enabled on my account when I call verizon? Could some one explain the

    1x
    > and the arrow stuff. I do not understand. I am new at this.


    MENU-9-3 will show you the new icons for the V11 firmware:

    Bold double arrows is "1X Data Active"
    Unbold double arrows is "1X Data Dormant"
    Circle arrow is "QNC Data Active"

    I just upgraded my LG4400 from v6 firmware to v11 firmware, but I didn't
    need to get my phone replaced afterwards (which you described in your other
    message).

    However, I am seeing the same thing that you are: if I have 1X showing, and
    I access Get It Now or Mobile Web (not connected to a PC), the double arrows
    flash about 4 times, and then the circle arrow comes on and is present when
    data transfer is occurring.

    If 1X isn't showing (D is showing instead), then the double arrows don't
    come on, and just the circle arrow comes on.

    So, this tells me that, when 1X is showing, Get It Now and Mobile Web will
    try to use a 1X data session at first, but then fall back to use a QNC data
    session.

    (When the phone is used as a modem, I can establish a 3G data session from
    the PC, achieving rates as high as 13K bytes/second.)

    Now, I thought I remembered reading, back when v10 firmware first came out,
    that upgrading to v10 would speed up Get It Now and Mobile Web sessions by
    using 1X sessions instead of QNC sessions. That's what I was expecting, but
    Verizon's data customer service tells me that Get It Now and Mobile Web
    aren't speeded up by the upgrade from v6 to v11.

    Anybody know the answer? Is their something that I have to do or Verizon
    has to do to make my Get It Now and Mobile Web sessions use 1X sessions
    instead of QNC sessions?

    Wayne
     
  6. Wayne Farmer

    Wayne Farmer Guest

    "Viper" <user@123456.com> wrote in message
    news:F3XFc.10674$1F6.4017@fe37.usenetserver.com...
    > I have a lg4400 with firmware 11. What dose the 2 arrows mean that flash

    for
    > a few seconds when I am in Get It Now and Web? What dose the circle arrow
    > mean that flashes? The 2 arrows flash for a few seconds and then it goes

    to
    > the circle arrow. I had firmware 6 before I upgraded to version 11. I stay
    > in the 1x mode when I get the circle arrow. Is there something that needs

    to
    > be enabled on my account when I call verizon? Could some one explain the

    1x
    > and the arrow stuff. I do not understand. I am new at this.


    MENU-9-3 will show you the new icons for the V11 firmware:

    Bold double arrows is "1X Data Active"
    Unbold double arrows is "1X Data Dormant"
    Circle arrow is "QNC Data Active"

    I just upgraded my LG4400 from v6 firmware to v11 firmware, but I didn't
    need to get my phone replaced afterwards (which you described in your other
    message).

    However, I am seeing the same thing that you are: if I have 1X showing, and
    I access Get It Now or Mobile Web (not connected to a PC), the double arrows
    flash about 4 times, and then the circle arrow comes on and is present when
    data transfer is occurring.

    If 1X isn't showing (D is showing instead), then the double arrows don't
    come on, and just the circle arrow comes on.

    So, this tells me that, when 1X is showing, Get It Now and Mobile Web will
    try to use a 1X data session at first, but then fall back to use a QNC data
    session.

    (When the phone is used as a modem, I can establish a 3G data session from
    the PC, achieving rates as high as 13K bytes/second.)

    Now, I thought I remembered reading, back when v10 firmware first came out,
    that upgrading to v10 would speed up Get It Now and Mobile Web sessions by
    using 1X sessions instead of QNC sessions. That's what I was expecting, but
    Verizon's data customer service tells me that Get It Now and Mobile Web
    aren't speeded up by the upgrade from v6 to v11.

    Anybody know the answer? Is their something that I have to do or Verizon
    has to do to make my Get It Now and Mobile Web sessions use 1X sessions
    instead of QNC sessions?

    Wayne
     
  7. Wayne Farmer

    Wayne Farmer Guest

    "Viper" <user@123456.com> wrote in message
    news:F3XFc.10674$1F6.4017@fe37.usenetserver.com...
    > I have a lg4400 with firmware 11. What dose the 2 arrows mean that flash

    for
    > a few seconds when I am in Get It Now and Web? What dose the circle arrow
    > mean that flashes? The 2 arrows flash for a few seconds and then it goes

    to
    > the circle arrow. I had firmware 6 before I upgraded to version 11. I stay
    > in the 1x mode when I get the circle arrow. Is there something that needs

    to
    > be enabled on my account when I call verizon? Could some one explain the

    1x
    > and the arrow stuff. I do not understand. I am new at this.


    MENU-9-3 will show you the new icons for the V11 firmware:

    Bold double arrows is "1X Data Active"
    Unbold double arrows is "1X Data Dormant"
    Circle arrow is "QNC Data Active"

    I just upgraded my LG4400 from v6 firmware to v11 firmware, but I didn't
    need to get my phone replaced afterwards (which you described in your other
    message).

    However, I am seeing the same thing that you are: if I have 1X showing, and
    I access Get It Now or Mobile Web (not connected to a PC), the double arrows
    flash about 4 times, and then the circle arrow comes on and is present when
    data transfer is occurring.

    If 1X isn't showing (D is showing instead), then the double arrows don't
    come on, and just the circle arrow comes on.

    So, this tells me that, when 1X is showing, Get It Now and Mobile Web will
    try to use a 1X data session at first, but then fall back to use a QNC data
    session.

    (When the phone is used as a modem, I can establish a 3G data session from
    the PC, achieving rates as high as 13K bytes/second.)

    Now, I thought I remembered reading, back when v10 firmware first came out,
    that upgrading to v10 would speed up Get It Now and Mobile Web sessions by
    using 1X sessions instead of QNC sessions. That's what I was expecting, but
    Verizon's data customer service tells me that Get It Now and Mobile Web
    aren't speeded up by the upgrade from v6 to v11.

    Anybody know the answer? Is their something that I have to do or Verizon
    has to do to make my Get It Now and Mobile Web sessions use 1X sessions
    instead of QNC sessions?

    Wayne
     
  8. Wayne Farmer

    Wayne Farmer Guest

    "Viper" <user@123456.com> wrote in message
    news:F3XFc.10674$1F6.4017@fe37.usenetserver.com...
    > I have a lg4400 with firmware 11. What dose the 2 arrows mean that flash

    for
    > a few seconds when I am in Get It Now and Web? What dose the circle arrow
    > mean that flashes? The 2 arrows flash for a few seconds and then it goes

    to
    > the circle arrow. I had firmware 6 before I upgraded to version 11. I stay
    > in the 1x mode when I get the circle arrow. Is there something that needs

    to
    > be enabled on my account when I call verizon? Could some one explain the

    1x
    > and the arrow stuff. I do not understand. I am new at this.


    MENU-9-3 will show you the new icons for the V11 firmware:

    Bold double arrows is "1X Data Active"
    Unbold double arrows is "1X Data Dormant"
    Circle arrow is "QNC Data Active"

    I just upgraded my LG4400 from v6 firmware to v11 firmware, but I didn't
    need to get my phone replaced afterwards (which you described in your other
    message).

    However, I am seeing the same thing that you are: if I have 1X showing, and
    I access Get It Now or Mobile Web (not connected to a PC), the double arrows
    flash about 4 times, and then the circle arrow comes on and is present when
    data transfer is occurring.

    If 1X isn't showing (D is showing instead), then the double arrows don't
    come on, and just the circle arrow comes on.

    So, this tells me that, when 1X is showing, Get It Now and Mobile Web will
    try to use a 1X data session at first, but then fall back to use a QNC data
    session.

    (When the phone is used as a modem, I can establish a 3G data session from
    the PC, achieving rates as high as 13K bytes/second.)

    Now, I thought I remembered reading, back when v10 firmware first came out,
    that upgrading to v10 would speed up Get It Now and Mobile Web sessions by
    using 1X sessions instead of QNC sessions. That's what I was expecting, but
    Verizon's data customer service tells me that Get It Now and Mobile Web
    aren't speeded up by the upgrade from v6 to v11.

    Anybody know the answer? Is their something that I have to do or Verizon
    has to do to make my Get It Now and Mobile Web sessions use 1X sessions
    instead of QNC sessions?

    Wayne
     
  9. Wayne Farmer

    Wayne Farmer Guest

    "Viper" <user@123456.com> wrote in message
    news:F3XFc.10674$1F6.4017@fe37.usenetserver.com...
    > I have a lg4400 with firmware 11. What dose the 2 arrows mean that flash

    for
    > a few seconds when I am in Get It Now and Web? What dose the circle arrow
    > mean that flashes? The 2 arrows flash for a few seconds and then it goes

    to
    > the circle arrow. I had firmware 6 before I upgraded to version 11. I stay
    > in the 1x mode when I get the circle arrow. Is there something that needs

    to
    > be enabled on my account when I call verizon? Could some one explain the

    1x
    > and the arrow stuff. I do not understand. I am new at this.


    MENU-9-3 will show you the new icons for the V11 firmware:

    Bold double arrows is "1X Data Active"
    Unbold double arrows is "1X Data Dormant"
    Circle arrow is "QNC Data Active"

    I just upgraded my LG4400 from v6 firmware to v11 firmware, but I didn't
    need to get my phone replaced afterwards (which you described in your other
    message).

    However, I am seeing the same thing that you are: if I have 1X showing, and
    I access Get It Now or Mobile Web (not connected to a PC), the double arrows
    flash about 4 times, and then the circle arrow comes on and is present when
    data transfer is occurring.

    If 1X isn't showing (D is showing instead), then the double arrows don't
    come on, and just the circle arrow comes on.

    So, this tells me that, when 1X is showing, Get It Now and Mobile Web will
    try to use a 1X data session at first, but then fall back to use a QNC data
    session.

    (When the phone is used as a modem, I can establish a 3G data session from
    the PC, achieving rates as high as 13K bytes/second.)

    Now, I thought I remembered reading, back when v10 firmware first came out,
    that upgrading to v10 would speed up Get It Now and Mobile Web sessions by
    using 1X sessions instead of QNC sessions. That's what I was expecting, but
    Verizon's data customer service tells me that Get It Now and Mobile Web
    aren't speeded up by the upgrade from v6 to v11.

    Anybody know the answer? Is their something that I have to do or Verizon
    has to do to make my Get It Now and Mobile Web sessions use 1X sessions
    instead of QNC sessions?

    Wayne
     
  10. Wayne Farmer

    Wayne Farmer Guest

    "Viper" <user@123456.com> wrote in message
    news:F3XFc.10674$1F6.4017@fe37.usenetserver.com...
    > I have a lg4400 with firmware 11. What dose the 2 arrows mean that flash

    for
    > a few seconds when I am in Get It Now and Web? What dose the circle arrow
    > mean that flashes? The 2 arrows flash for a few seconds and then it goes

    to
    > the circle arrow. I had firmware 6 before I upgraded to version 11. I stay
    > in the 1x mode when I get the circle arrow. Is there something that needs

    to
    > be enabled on my account when I call verizon? Could some one explain the

    1x
    > and the arrow stuff. I do not understand. I am new at this.


    MENU-9-3 will show you the new icons for the V11 firmware:

    Bold double arrows is "1X Data Active"
    Unbold double arrows is "1X Data Dormant"
    Circle arrow is "QNC Data Active"

    I just upgraded my LG4400 from v6 firmware to v11 firmware, but I didn't
    need to get my phone replaced afterwards (which you described in your other
    message).

    However, I am seeing the same thing that you are: if I have 1X showing, and
    I access Get It Now or Mobile Web (not connected to a PC), the double arrows
    flash about 4 times, and then the circle arrow comes on and is present when
    data transfer is occurring.

    If 1X isn't showing (D is showing instead), then the double arrows don't
    come on, and just the circle arrow comes on.

    So, this tells me that, when 1X is showing, Get It Now and Mobile Web will
    try to use a 1X data session at first, but then fall back to use a QNC data
    session.

    (When the phone is used as a modem, I can establish a 3G data session from
    the PC, achieving rates as high as 13K bytes/second.)

    Now, I thought I remembered reading, back when v10 firmware first came out,
    that upgrading to v10 would speed up Get It Now and Mobile Web sessions by
    using 1X sessions instead of QNC sessions. That's what I was expecting, but
    Verizon's data customer service tells me that Get It Now and Mobile Web
    aren't speeded up by the upgrade from v6 to v11.

    Anybody know the answer? Is their something that I have to do or Verizon
    has to do to make my Get It Now and Mobile Web sessions use 1X sessions
    instead of QNC sessions?

    Wayne
     
  11. Wayne Farmer

    Wayne Farmer Guest

    "Viper" <user@123456.com> wrote in message
    news:F3XFc.10674$1F6.4017@fe37.usenetserver.com...
    > I have a lg4400 with firmware 11. What dose the 2 arrows mean that flash

    for
    > a few seconds when I am in Get It Now and Web? What dose the circle arrow
    > mean that flashes? The 2 arrows flash for a few seconds and then it goes

    to
    > the circle arrow. I had firmware 6 before I upgraded to version 11. I stay
    > in the 1x mode when I get the circle arrow. Is there something that needs

    to
    > be enabled on my account when I call verizon? Could some one explain the

    1x
    > and the arrow stuff. I do not understand. I am new at this.


    MENU-9-3 will show you the new icons for the V11 firmware:

    Bold double arrows is "1X Data Active"
    Unbold double arrows is "1X Data Dormant"
    Circle arrow is "QNC Data Active"

    I just upgraded my LG4400 from v6 firmware to v11 firmware, but I didn't
    need to get my phone replaced afterwards (which you described in your other
    message).

    However, I am seeing the same thing that you are: if I have 1X showing, and
    I access Get It Now or Mobile Web (not connected to a PC), the double arrows
    flash about 4 times, and then the circle arrow comes on and is present when
    data transfer is occurring.

    If 1X isn't showing (D is showing instead), then the double arrows don't
    come on, and just the circle arrow comes on.

    So, this tells me that, when 1X is showing, Get It Now and Mobile Web will
    try to use a 1X data session at first, but then fall back to use a QNC data
    session.

    (When the phone is used as a modem, I can establish a 3G data session from
    the PC, achieving rates as high as 13K bytes/second.)

    Now, I thought I remembered reading, back when v10 firmware first came out,
    that upgrading to v10 would speed up Get It Now and Mobile Web sessions by
    using 1X sessions instead of QNC sessions. That's what I was expecting, but
    Verizon's data customer service tells me that Get It Now and Mobile Web
    aren't speeded up by the upgrade from v6 to v11.

    Anybody know the answer? Is their something that I have to do or Verizon
    has to do to make my Get It Now and Mobile Web sessions use 1X sessions
    instead of QNC sessions?

    Wayne
     
  12. Wayne Farmer

    Wayne Farmer Guest

    "Viper" <user@123456.com> wrote in message
    news:F3XFc.10674$1F6.4017@fe37.usenetserver.com...
    > I have a lg4400 with firmware 11. What dose the 2 arrows mean that flash

    for
    > a few seconds when I am in Get It Now and Web? What dose the circle arrow
    > mean that flashes? The 2 arrows flash for a few seconds and then it goes

    to
    > the circle arrow. I had firmware 6 before I upgraded to version 11. I stay
    > in the 1x mode when I get the circle arrow. Is there something that needs

    to
    > be enabled on my account when I call verizon? Could some one explain the

    1x
    > and the arrow stuff. I do not understand. I am new at this.


    MENU-9-3 will show you the new icons for the V11 firmware:

    Bold double arrows is "1X Data Active"
    Unbold double arrows is "1X Data Dormant"
    Circle arrow is "QNC Data Active"

    I just upgraded my LG4400 from v6 firmware to v11 firmware, but I didn't
    need to get my phone replaced afterwards (which you described in your other
    message).

    However, I am seeing the same thing that you are: if I have 1X showing, and
    I access Get It Now or Mobile Web (not connected to a PC), the double arrows
    flash about 4 times, and then the circle arrow comes on and is present when
    data transfer is occurring.

    If 1X isn't showing (D is showing instead), then the double arrows don't
    come on, and just the circle arrow comes on.

    So, this tells me that, when 1X is showing, Get It Now and Mobile Web will
    try to use a 1X data session at first, but then fall back to use a QNC data
    session.

    (When the phone is used as a modem, I can establish a 3G data session from
    the PC, achieving rates as high as 13K bytes/second.)

    Now, I thought I remembered reading, back when v10 firmware first came out,
    that upgrading to v10 would speed up Get It Now and Mobile Web sessions by
    using 1X sessions instead of QNC sessions. That's what I was expecting, but
    Verizon's data customer service tells me that Get It Now and Mobile Web
    aren't speeded up by the upgrade from v6 to v11.

    Anybody know the answer? Is their something that I have to do or Verizon
    has to do to make my Get It Now and Mobile Web sessions use 1X sessions
    instead of QNC sessions?

    Wayne
     
  13. Wayne Farmer

    Wayne Farmer Guest

    "Viper" <user@123456.com> wrote in message
    news:F3XFc.10674$1F6.4017@fe37.usenetserver.com...
    > I have a lg4400 with firmware 11. What dose the 2 arrows mean that flash

    for
    > a few seconds when I am in Get It Now and Web? What dose the circle arrow
    > mean that flashes? The 2 arrows flash for a few seconds and then it goes

    to
    > the circle arrow. I had firmware 6 before I upgraded to version 11. I stay
    > in the 1x mode when I get the circle arrow. Is there something that needs

    to
    > be enabled on my account when I call verizon? Could some one explain the

    1x
    > and the arrow stuff. I do not understand. I am new at this.


    MENU-9-3 will show you the new icons for the V11 firmware:

    Bold double arrows is "1X Data Active"
    Unbold double arrows is "1X Data Dormant"
    Circle arrow is "QNC Data Active"

    I just upgraded my LG4400 from v6 firmware to v11 firmware, but I didn't
    need to get my phone replaced afterwards (which you described in your other
    message).

    However, I am seeing the same thing that you are: if I have 1X showing, and
    I access Get It Now or Mobile Web (not connected to a PC), the double arrows
    flash about 4 times, and then the circle arrow comes on and is present when
    data transfer is occurring.

    If 1X isn't showing (D is showing instead), then the double arrows don't
    come on, and just the circle arrow comes on.

    So, this tells me that, when 1X is showing, Get It Now and Mobile Web will
    try to use a 1X data session at first, but then fall back to use a QNC data
    session.

    (When the phone is used as a modem, I can establish a 3G data session from
    the PC, achieving rates as high as 13K bytes/second.)

    Now, I thought I remembered reading, back when v10 firmware first came out,
    that upgrading to v10 would speed up Get It Now and Mobile Web sessions by
    using 1X sessions instead of QNC sessions. That's what I was expecting, but
    Verizon's data customer service tells me that Get It Now and Mobile Web
    aren't speeded up by the upgrade from v6 to v11.

    Anybody know the answer? Is their something that I have to do or Verizon
    has to do to make my Get It Now and Mobile Web sessions use 1X sessions
    instead of QNC sessions?

    Wayne
     
  14. Wayne Farmer

    Wayne Farmer Guest

    "Viper" <user@123456.com> wrote in message
    news:F3XFc.10674$1F6.4017@fe37.usenetserver.com...
    > I have a lg4400 with firmware 11. What dose the 2 arrows mean that flash

    for
    > a few seconds when I am in Get It Now and Web? What dose the circle arrow
    > mean that flashes? The 2 arrows flash for a few seconds and then it goes

    to
    > the circle arrow. I had firmware 6 before I upgraded to version 11. I stay
    > in the 1x mode when I get the circle arrow. Is there something that needs

    to
    > be enabled on my account when I call verizon? Could some one explain the

    1x
    > and the arrow stuff. I do not understand. I am new at this.


    MENU-9-3 will show you the new icons for the V11 firmware:

    Bold double arrows is "1X Data Active"
    Unbold double arrows is "1X Data Dormant"
    Circle arrow is "QNC Data Active"

    I just upgraded my LG4400 from v6 firmware to v11 firmware, but I didn't
    need to get my phone replaced afterwards (which you described in your other
    message).

    However, I am seeing the same thing that you are: if I have 1X showing, and
    I access Get It Now or Mobile Web (not connected to a PC), the double arrows
    flash about 4 times, and then the circle arrow comes on and is present when
    data transfer is occurring.

    If 1X isn't showing (D is showing instead), then the double arrows don't
    come on, and just the circle arrow comes on.

    So, this tells me that, when 1X is showing, Get It Now and Mobile Web will
    try to use a 1X data session at first, but then fall back to use a QNC data
    session.

    (When the phone is used as a modem, I can establish a 3G data session from
    the PC, achieving rates as high as 13K bytes/second.)

    Now, I thought I remembered reading, back when v10 firmware first came out,
    that upgrading to v10 would speed up Get It Now and Mobile Web sessions by
    using 1X sessions instead of QNC sessions. That's what I was expecting, but
    Verizon's data customer service tells me that Get It Now and Mobile Web
    aren't speeded up by the upgrade from v6 to v11.

    Anybody know the answer? Is their something that I have to do or Verizon
    has to do to make my Get It Now and Mobile Web sessions use 1X sessions
    instead of QNC sessions?

    Wayne
     
  15. Wayne Farmer

    Wayne Farmer Guest

    "Viper" <user@123456.com> wrote in message
    news:F3XFc.10674$1F6.4017@fe37.usenetserver.com...
    > I have a lg4400 with firmware 11. What dose the 2 arrows mean that flash

    for
    > a few seconds when I am in Get It Now and Web? What dose the circle arrow
    > mean that flashes? The 2 arrows flash for a few seconds and then it goes

    to
    > the circle arrow. I had firmware 6 before I upgraded to version 11. I stay
    > in the 1x mode when I get the circle arrow. Is there something that needs

    to
    > be enabled on my account when I call verizon? Could some one explain the

    1x
    > and the arrow stuff. I do not understand. I am new at this.


    MENU-9-3 will show you the new icons for the V11 firmware:

    Bold double arrows is "1X Data Active"
    Unbold double arrows is "1X Data Dormant"
    Circle arrow is "QNC Data Active"

    I just upgraded my LG4400 from v6 firmware to v11 firmware, but I didn't
    need to get my phone replaced afterwards (which you described in your other
    message).

    However, I am seeing the same thing that you are: if I have 1X showing, and
    I access Get It Now or Mobile Web (not connected to a PC), the double arrows
    flash about 4 times, and then the circle arrow comes on and is present when
    data transfer is occurring.

    If 1X isn't showing (D is showing instead), then the double arrows don't
    come on, and just the circle arrow comes on.

    So, this tells me that, when 1X is showing, Get It Now and Mobile Web will
    try to use a 1X data session at first, but then fall back to use a QNC data
    session.

    (When the phone is used as a modem, I can establish a 3G data session from
    the PC, achieving rates as high as 13K bytes/second.)

    Now, I thought I remembered reading, back when v10 firmware first came out,
    that upgrading to v10 would speed up Get It Now and Mobile Web sessions by
    using 1X sessions instead of QNC sessions. That's what I was expecting, but
    Verizon's data customer service tells me that Get It Now and Mobile Web
    aren't speeded up by the upgrade from v6 to v11.

    Anybody know the answer? Is their something that I have to do or Verizon
    has to do to make my Get It Now and Mobile Web sessions use 1X sessions
    instead of QNC sessions?

    Wayne
     
  16. Wayne Farmer

    Wayne Farmer Guest

    "Viper" <user@123456.com> wrote in message
    news:F3XFc.10674$1F6.4017@fe37.usenetserver.com...
    > I have a lg4400 with firmware 11. What dose the 2 arrows mean that flash

    for
    > a few seconds when I am in Get It Now and Web? What dose the circle arrow
    > mean that flashes? The 2 arrows flash for a few seconds and then it goes

    to
    > the circle arrow. I had firmware 6 before I upgraded to version 11. I stay
    > in the 1x mode when I get the circle arrow. Is there something that needs

    to
    > be enabled on my account when I call verizon? Could some one explain the

    1x
    > and the arrow stuff. I do not understand. I am new at this.


    MENU-9-3 will show you the new icons for the V11 firmware:

    Bold double arrows is "1X Data Active"
    Unbold double arrows is "1X Data Dormant"
    Circle arrow is "QNC Data Active"

    I just upgraded my LG4400 from v6 firmware to v11 firmware, but I didn't
    need to get my phone replaced afterwards (which you described in your other
    message).

    However, I am seeing the same thing that you are: if I have 1X showing, and
    I access Get It Now or Mobile Web (not connected to a PC), the double arrows
    flash about 4 times, and then the circle arrow comes on and is present when
    data transfer is occurring.

    If 1X isn't showing (D is showing instead), then the double arrows don't
    come on, and just the circle arrow comes on.

    So, this tells me that, when 1X is showing, Get It Now and Mobile Web will
    try to use a 1X data session at first, but then fall back to use a QNC data
    session.

    (When the phone is used as a modem, I can establish a 3G data session from
    the PC, achieving rates as high as 13K bytes/second.)

    Now, I thought I remembered reading, back when v10 firmware first came out,
    that upgrading to v10 would speed up Get It Now and Mobile Web sessions by
    using 1X sessions instead of QNC sessions. That's what I was expecting, but
    Verizon's data customer service tells me that Get It Now and Mobile Web
    aren't speeded up by the upgrade from v6 to v11.

    Anybody know the answer? Is their something that I have to do or Verizon
    has to do to make my Get It Now and Mobile Web sessions use 1X sessions
    instead of QNC sessions?

    Wayne
     
  17. Wayne Farmer

    Wayne Farmer Guest

    "Viper" <user@123456.com> wrote in message
    news:F3XFc.10674$1F6.4017@fe37.usenetserver.com...
    > I have a lg4400 with firmware 11. What dose the 2 arrows mean that flash

    for
    > a few seconds when I am in Get It Now and Web? What dose the circle arrow
    > mean that flashes? The 2 arrows flash for a few seconds and then it goes

    to
    > the circle arrow. I had firmware 6 before I upgraded to version 11. I stay
    > in the 1x mode when I get the circle arrow. Is there something that needs

    to
    > be enabled on my account when I call verizon? Could some one explain the

    1x
    > and the arrow stuff. I do not understand. I am new at this.


    MENU-9-3 will show you the new icons for the V11 firmware:

    Bold double arrows is "1X Data Active"
    Unbold double arrows is "1X Data Dormant"
    Circle arrow is "QNC Data Active"

    I just upgraded my LG4400 from v6 firmware to v11 firmware, but I didn't
    need to get my phone replaced afterwards (which you described in your other
    message).

    However, I am seeing the same thing that you are: if I have 1X showing, and
    I access Get It Now or Mobile Web (not connected to a PC), the double arrows
    flash about 4 times, and then the circle arrow comes on and is present when
    data transfer is occurring.

    If 1X isn't showing (D is showing instead), then the double arrows don't
    come on, and just the circle arrow comes on.

    So, this tells me that, when 1X is showing, Get It Now and Mobile Web will
    try to use a 1X data session at first, but then fall back to use a QNC data
    session.

    (When the phone is used as a modem, I can establish a 3G data session from
    the PC, achieving rates as high as 13K bytes/second.)

    Now, I thought I remembered reading, back when v10 firmware first came out,
    that upgrading to v10 would speed up Get It Now and Mobile Web sessions by
    using 1X sessions instead of QNC sessions. That's what I was expecting, but
    Verizon's data customer service tells me that Get It Now and Mobile Web
    aren't speeded up by the upgrade from v6 to v11.

    Anybody know the answer? Is their something that I have to do or Verizon
    has to do to make my Get It Now and Mobile Web sessions use 1X sessions
    instead of QNC sessions?

    Wayne
     
  18. Wayne Farmer

    Wayne Farmer Guest

    "Viper" <user@123456.com> wrote in message
    news:F3XFc.10674$1F6.4017@fe37.usenetserver.com...
    > I have a lg4400 with firmware 11. What dose the 2 arrows mean that flash

    for
    > a few seconds when I am in Get It Now and Web? What dose the circle arrow
    > mean that flashes? The 2 arrows flash for a few seconds and then it goes

    to
    > the circle arrow. I had firmware 6 before I upgraded to version 11. I stay
    > in the 1x mode when I get the circle arrow. Is there something that needs

    to
    > be enabled on my account when I call verizon? Could some one explain the

    1x
    > and the arrow stuff. I do not understand. I am new at this.


    MENU-9-3 will show you the new icons for the V11 firmware:

    Bold double arrows is "1X Data Active"
    Unbold double arrows is "1X Data Dormant"
    Circle arrow is "QNC Data Active"

    I just upgraded my LG4400 from v6 firmware to v11 firmware, but I didn't
    need to get my phone replaced afterwards (which you described in your other
    message).

    However, I am seeing the same thing that you are: if I have 1X showing, and
    I access Get It Now or Mobile Web (not connected to a PC), the double arrows
    flash about 4 times, and then the circle arrow comes on and is present when
    data transfer is occurring.

    If 1X isn't showing (D is showing instead), then the double arrows don't
    come on, and just the circle arrow comes on.

    So, this tells me that, when 1X is showing, Get It Now and Mobile Web will
    try to use a 1X data session at first, but then fall back to use a QNC data
    session.

    (When the phone is used as a modem, I can establish a 3G data session from
    the PC, achieving rates as high as 13K bytes/second.)

    Now, I thought I remembered reading, back when v10 firmware first came out,
    that upgrading to v10 would speed up Get It Now and Mobile Web sessions by
    using 1X sessions instead of QNC sessions. That's what I was expecting, but
    Verizon's data customer service tells me that Get It Now and Mobile Web
    aren't speeded up by the upgrade from v6 to v11.

    Anybody know the answer? Is their something that I have to do or Verizon
    has to do to make my Get It Now and Mobile Web sessions use 1X sessions
    instead of QNC sessions?

    Wayne
     
  19. Wayne Farmer

    Wayne Farmer Guest

    "Viper" <user@123456.com> wrote in message
    news:F3XFc.10674$1F6.4017@fe37.usenetserver.com...
    > I have a lg4400 with firmware 11. What dose the 2 arrows mean that flash

    for
    > a few seconds when I am in Get It Now and Web? What dose the circle arrow
    > mean that flashes? The 2 arrows flash for a few seconds and then it goes

    to
    > the circle arrow. I had firmware 6 before I upgraded to version 11. I stay
    > in the 1x mode when I get the circle arrow. Is there something that needs

    to
    > be enabled on my account when I call verizon? Could some one explain the

    1x
    > and the arrow stuff. I do not understand. I am new at this.


    MENU-9-3 will show you the new icons for the V11 firmware:

    Bold double arrows is "1X Data Active"
    Unbold double arrows is "1X Data Dormant"
    Circle arrow is "QNC Data Active"

    I just upgraded my LG4400 from v6 firmware to v11 firmware, but I didn't
    need to get my phone replaced afterwards (which you described in your other
    message).

    However, I am seeing the same thing that you are: if I have 1X showing, and
    I access Get It Now or Mobile Web (not connected to a PC), the double arrows
    flash about 4 times, and then the circle arrow comes on and is present when
    data transfer is occurring.

    If 1X isn't showing (D is showing instead), then the double arrows don't
    come on, and just the circle arrow comes on.

    So, this tells me that, when 1X is showing, Get It Now and Mobile Web will
    try to use a 1X data session at first, but then fall back to use a QNC data
    session.

    (When the phone is used as a modem, I can establish a 3G data session from
    the PC, achieving rates as high as 13K bytes/second.)

    Now, I thought I remembered reading, back when v10 firmware first came out,
    that upgrading to v10 would speed up Get It Now and Mobile Web sessions by
    using 1X sessions instead of QNC sessions. That's what I was expecting, but
    Verizon's data customer service tells me that Get It Now and Mobile Web
    aren't speeded up by the upgrade from v6 to v11.

    Anybody know the answer? Is their something that I have to do or Verizon
    has to do to make my Get It Now and Mobile Web sessions use 1X sessions
    instead of QNC sessions?

    Wayne
     
  20. Wayne Farmer

    Wayne Farmer Guest

    "Viper" <user@123456.com> wrote in message
    news:F3XFc.10674$1F6.4017@fe37.usenetserver.com...
    > I have a lg4400 with firmware 11. What dose the 2 arrows mean that flash

    for
    > a few seconds when I am in Get It Now and Web? What dose the circle arrow
    > mean that flashes? The 2 arrows flash for a few seconds and then it goes

    to
    > the circle arrow. I had firmware 6 before I upgraded to version 11. I stay
    > in the 1x mode when I get the circle arrow. Is there something that needs

    to
    > be enabled on my account when I call verizon? Could some one explain the

    1x
    > and the arrow stuff. I do not understand. I am new at this.


    MENU-9-3 will show you the new icons for the V11 firmware:

    Bold double arrows is "1X Data Active"
    Unbold double arrows is "1X Data Dormant"
    Circle arrow is "QNC Data Active"

    I just upgraded my LG4400 from v6 firmware to v11 firmware, but I didn't
    need to get my phone replaced afterwards (which you described in your other
    message).

    However, I am seeing the same thing that you are: if I have 1X showing, and
    I access Get It Now or Mobile Web (not connected to a PC), the double arrows
    flash about 4 times, and then the circle arrow comes on and is present when
    data transfer is occurring.

    If 1X isn't showing (D is showing instead), then the double arrows don't
    come on, and just the circle arrow comes on.

    So, this tells me that, when 1X is showing, Get It Now and Mobile Web will
    try to use a 1X data session at first, but then fall back to use a QNC data
    session.

    (When the phone is used as a modem, I can establish a 3G data session from
    the PC, achieving rates as high as 13K bytes/second.)

    Now, I thought I remembered reading, back when v10 firmware first came out,
    that upgrading to v10 would speed up Get It Now and Mobile Web sessions by
    using 1X sessions instead of QNC sessions. That's what I was expecting, but
    Verizon's data customer service tells me that Get It Now and Mobile Web
    aren't speeded up by the upgrade from v6 to v11.

    Anybody know the answer? Is their something that I have to do or Verizon
    has to do to make my Get It Now and Mobile Web sessions use 1X sessions
    instead of QNC sessions?

    Wayne
     

Welcome to VerizonForums!

Unfortunately you can't reply until you log in or sign up.


Forgot your password?